What are the Signs of a Bad Lift Pump?

What are the Signs of a Bad Lift Pump?

Lift pumps are a part of modern devices that make the processes of moving objects or materials from one place to another quick and accident-free. Specifically, lift pumps are used in septic systems so that the waste water from a lower pressure area will be moved to a higher pressure area smoothly and regularly. Any malfunction with the lift pump will result in severe inconveniences such as back-flow and leakages, problems with the float ball, and electrical problems.

Lift Pump Repair service providers must be contacted in case you sense something is unusual with your system so that it will be checked right away.

The said issues can be avoided by being aware of the different signs of a bad lift pump. Lift Pump Repair Allendale is there to answer your need if you have an overflowing tank, stuck lift pump, motor and wiring issues, float problem and faulty valve.

Overflowing tank

You surely have a problem with your lift pump when the tank starts to sink or overflow. Contact Lift Pump Repair Muskegon so that your system will be checked and repaired. The septic system must have the characteristic of prevailing over its geographical issues and gravity so that the wastewater will be moved to a high-pressure location from a low-pressure level. Having a backflow is an unimaginable and truly disgusting experience.

Stuck lift pump

You’re in bad luck when your system is clogging. This usually results from a stuck lift pump. If there is an interruption in the flow of the wastewater due to some blockage, you have to seek expert help so that the problem will be solved immediately. Lift Pump Repair Grand Haven would answer your call for help in no time at all.

Motor and wiring issues

Another problem caused by a bad lift pump is about motor and wiring issues. After being tested but your pump is still not working, the problem may be because of faulty electrical wiring. The best thing to do is to have your wiring and circuit breaker checked for troubleshooting. Your servicemen such as from Lift Pump Repair Whitehall will replace any damaged line to keep the pump working normally. If the problem still persists, the motor might be the source of the problem. The repairmen will either make necessary actions to make the motor work or they may replace your lift pump.

Float problem

When you notice that the float detector is damaged, the pump will not function properly. You need to have it repaired or replaced by experts such as from the Lift Pump Repair Holland.

Faulty valve

Another reason for the lift pump malfunction is a faulty valve. If this happens, the wastewater leaks from the pump to the septic system. This indicates that there is no sufficient pressure to push the wastewater to the mainline or drain field. The service providers and expert staff from the Lift Pump Repair Coopersville and the Lift Pump Repair Twin Lake. You have nothing to worry about because in the hands of these expert staff, your problems will be gone.

If you sense something is not well with your system, seek instant help by calling the following numbers: Muskegon at 231-739-7423, Grand Haven at 616-847-1072, Whitehall at 231-893-4252, Holland at 616-392-8988, Coopersville at 616-837-1800, Allendale at 616-895-9080, and Twin Lake at 231-828-5595. For more details of their specific products and services, visit http://bit.ly/WMSSDContactUs or click here.

Close Menu
shares